Operation Manual

Cisco SPA IP Phone Field Reference

Ext Tab

Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 311

Parameter Description

Dial Plan Dial plan script for this line.

The default is (<9:>xx.)

(*xx|[3469]11|0|00|[2-

9]xxxxxx|1xxx[2-

9]xxxxxxS0|xxxxxxxxxxxx.)

The dial plan syntax is expanded in the Cisco SPA

IP phones to allow the designation of three

parameters to be used with a specific gateway:

• uid— authentication user-id

• pwd—authentication password

• nat— if this parameter is present, use NAT

mapping

Each parameter is separated by a semi-colon (;).

Caller ID Map Inbound caller ID numbers can be mapped to a

different string. For example, a number that begins

with +44xxxxxx can be mapped to 0xxxxxx. This

feature has the same syntax as the Dial Plan

parameter. With this parameter, you can specify

how to map a caller ID number for display on

screen and recorded into call logs. (Not applicable

to Cisco WIP310.)

Enable IP Dialing Enable or disable IP dialing.

Defaults to no.

Downloaded from www.Manualslib.com manuals search engine