Operation Manual

Cisco SPA IP Phone Field Reference
Phone Tab
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 290
A
Programmable Softkeys
The Cisco SPA300 Series and Cisco SPA500 Series IP phones (models with
display screens) have four softkeys on the screen that, when pressed, perform
certain actions.
You can customize the softkeys displayed on the phone, and create your own
softkeys for speed dials or XML scripts. Customized softkey information is entered
in the PSK1 through PSK6 fields. (See Customizing Phone Softkeys for more
information.)
Parameter Description
Programmable
Softkey Enable
Enables programmable softkeys (Cisco SPA525G or
Cisco SPA525G2 only).
Idle Key List Softkeys that display when the phone is idle.
Missed Call Key List Softkeys that display when a call has been missed.
Off Hook Key List Softkeys that display when the receiver is lifted, or the
headphone or speakerphone buttons are pressed.
Dialing Input Key List Softkeys that display when the user must enter dialing
data.
Progressing Key List Softkeys that display when a call is attempting to
connect. (Cisco SPA525G or Cisco SPA525G2 only)
Connected Key List Softkeys that display when a call is connected.
Start-Xfer Key List Softkeys that display when a call transfer has been
initiated.
Start-Conf Key List Softkeys that display when a conference call has been
initiated.
Conferencing Key List Softkeys that display when a conference call is in
progress.
Releasing Key List Softkeys that display when a call is disconnecting.
(Cisco SPA525G or Cisco SPA525G2 only)
Hold Key List Softkeys that display when one or more calls are on
hold. (Cisco SPA525G or Cisco SPA525G2only)
Ringing Key List Softkeys that display when a call is incoming.
Downloaded from www.Manualslib.com manuals search engine