Operation Manual

Cisco SPA IP Phone Field Reference
Phone Tab
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 272
A
Select Background Picture Select from Default, BMP Picture, or None.
Defaults to Default.
NOTE Not applicable to the Cisco WIP310,
Cisco SPA301, or Cisco SPA501G. On the
Cisco SPA525G or Cisco SPA525G2, this setting is
located on the User tab.
Softkey Labels Font Choose the font width for the softkey labels to
display on your phone. See Customizing Phone
Softkeys.
NOTE Not applicable to the Cisco WIP310,
Cisco SPA301, or Cisco SPA501G.
Screen Saver Enable Enables a screen saver on the IP phone screen.
When the phone is idle for a specified time, it
enters screen saver mode. (Users can set up
screen savers directly using phone Setup button.)
Any button press or on/off hook event triggers the
phone to return to its normal mode. (The screen
shows Press any key to unlock your
phone.) If a user password is set, the user must
enter it to exit screen saver mode.
NOTE Not applicable to the Cisco WIP310,
Cisco SPA301, or Cisco SPA501G. On the
Cisco SPA525G or Cisco SPA525G2, this setting is
located on the User tab.
Screen Saver Wait Amount of idle time before screen saver displays.
NOTE Not applicable to the Cisco WIP310,
Cisco SPA301, or Cisco SPA501G. On the
Cisco SPA525G or Cisco SPA525G2, this setting is
located on the User tab.
Parameter Description
Downloaded from www.Manualslib.com manuals search engine