Operation Manual

Cisco SPA IP Phone Field Reference
System Tab
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 226
A
Optional Network Configuration
Parameter Description
Host Name The host name of the SPA9000.
Domain The network domain of the SPA9000.
Primary DNS DNS server used by SPA9000 in addition to DHCP
supplied DNS servers if DHCP is enabled; when
DHCP is disabled, this is the primary DNS server.
Defaults to 0.0.0.0.
Secondary DNS DNS server used by SPA9000 in addition to DHCP
supplied DNS servers if DHCP is enabled; when
DHCP is disabled, this is the secondary DNS
server.
Defaults to 0.0.0.0.
DNS Server Order Specifies the method for selecting the DNS
server. The options are Manual, Manual/DHCP, and
DHCP/Manual.
DNS Query Mode Do parallel or sequential DNS Query. With parallel
DNS query mode, the SPA9000 sends the same
request to all the DNS servers at the same time
when doing a DNS lookup, the first incoming reply
is accepted by the SPA9000.
Defaults to parallel.
Syslog Server Specify the syslog server name and port. This
feature specifies the server for logging IP phone
system information and critical events. If both
Debug Server and Syslog Server are specified,
Syslog messages are also logged to the Debug
Server.
Debug Server The debug server name and port. This feature
specifies the server for logging IP phone debug
information. The level of detailed output depends
on the debug level parameter setting.
Downloaded from www.Manualslib.com manuals search engine