Operation Manual

Cisco SPA IP Phone Field Reference
System Tab
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 225
A
Power Settings (Cisco SPA500 Series or Cisco SPA300
Series Only)
PPPoE Settings (Cisco SPA525G or Cisco SPA525G2 Only)
Parameter Description
PoE Power Required Specifies the PoE power setting: Normal (default)
or Maximum.
When one or more attendant consoles are
attached to the phone, use Maximum to advertise
to a PoE switch that the phone will consume up to
12 watts.
When no attendant consoles are attached, use
Minimum to advertise a required power budget of
6.5 watts.
This parameter is not applicable to Cisco SPA301
or SPA303 as they do not have Cisco Attendant
Console support.
Parameter Description
PPPoE Login Name Specifies the account name assigned by the ISP
for connecting on a Point-to-Point Protocol over
Ethernet (PPPoE) link.
PPPoE Login Password Specifies the password assigned by the ISP for
connecting on a Point-to-Point Protocol over
Ethernet (PPPoE) link.
PPPoE Service Name Specifies the service name assigned by the ISP
for connecting on a Point-to-Point Protocol over
Ethernet (PPPoE) link.
Downloaded from www.Manualslib.com manuals search engine