Operation Manual

Cisco SPA IP Phone Field Reference
System Tab
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 224
A
Internet Connection Type and Static IP Settings
Parameter Description
Internet Connection Type Choose the type of internet connection:
•DHCP
• Static IP
• PPPoE (not applicable to
Cisco WIP310)
Static IP If static IP was chosen as the type of internet
connection, displays the static IP address
assigned to the phone.
Netmask If static IP was chosen as the type
Gateway Default router IP address. Blank if DHCP assigned.
LAN MTU LAN Maximum Transmission Unit size. Default
value: 1500.
Ethernet MTU
(Cisco SPA525G or
Cisco SPA525G2 SPCP
only)
Ethernet Maximum Transmission Unit size. Default
value: 1500.
Duplex Mode Duplex Mode—Choose one of the following to
configure the speed/duplex for the phone
Ethernet ports:
•Auto
• 10MBps/Duplex
• 10MBps/Half
• 100Mbps/Duplex
• 100MBps/Half
Downloaded from www.Manualslib.com manuals search engine