Operation Manual

Configuring LED Patterns

Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 208

STEP 3 Click Submit All Changes.

LED Script

The LED script describes the color and blinking pattern of a Line Key LED. Each

script contains a number of fields separated by a semicolon(;). White spaces are

ignored. Each field has the syntax <field-name> = <field-value>. The allowed field-

name and corresponding field-values are listed below:

c=o|r|g|a

This field sets the color of the LED. The 4 choices are:

• o = off

• r = red

• g = green

• a = amber (orange)

p=n[b]|s[b]|f[b]|d[b]|u[d]

This field sets the blinking pattern of the LED. The 4 choices are:

• nb = no blink (steady on or off)

• sb = slow blink (1s on and 1s off)

• fb = fast blink (100ms on and 100ms off)

• ud = user-defined (according to the contents of the u field)

Disabled LED Call Appearance is disabled (not available for any

incoming or outgoing call). Leaving this entry blank

defaults to c=o.

Registering LED The corresponding extension tries to register with the

proxy server.

Defaults to blanks (c=r;p=s).

Call Back Active

LED

Call Back operation is currently active on this call.

Defaults to blank (c=r;p=s).

Parameters Description

Downloaded from www.Manualslib.com manuals search engine