Operation Manual

Provisioning

Updating Profiles and Firmware

Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 166

Launch a Firmware Update by using a Browser Command

An upgrade command entered into the browser address bar can be used to

upgrade firmware on a phone. The phone updates only when it is idle. The update

is attempted automatically after the call is complete.

To update the phone firmware, enter this command:

http://phone-ip-address/admin/upgrade?protocol://server-

name[:port]]/firmware-path

• protocol defaults to TFTP.

• server-name defaults to the host requesting the URL.

• port defaults to:

- 69 for TFTP

- 80 for HTTP

- 443 for HTTPS

• firmware-path defaults to /spa.bin (The firmware-pathname typically

includes the file name of the binary located in a directory on the TFTP or

HTTP server. For example, http://192.168.2.217/admin/

upgrade?tftp://192.168.2.251/spa.bin) for SPA phones, and

/wip310.img for the Cisco WIP310.)

Log Upgrade Success

Msg

Syslog message issued after a firmware upgrade

attempt completes successfully. The default is

$PN $MAC -- Successful upgrade

$SCHEME://$SERVIP:$PORT$PATH -- $ERR

Log Upgrade Failure Msg Syslog message issued after a failed firmware

upgrade attempt. The default is

$PN $MAC -- Upgrade failed: $ERR.

License Keys This field is not used.

Parameter Description

Downloaded from www.Manualslib.com manuals search engine