Troubleshooting guide

1-2
Cisco Wide Area Application Services Configuration Guide
OL-26579-01
Appendix 1 Transaction Log Format
Dst_IP, Dst_Port Destination IP address and port number for connection.
OT Indicates an optimized connection.
BP Indicates a pass-through connection.
SODRE Indicates a log message generated by TFO.
Log_type START or END indicates the start or end of the flow.
Conn_type Type of connection:
INTERNAL CLIENT–locally initiated connection from the WAE,
EXTERNAL CLIENT–WAE acting as branch device for the connection,
INTERNAL SERVER–locally terminated connection at the WAE,
EXTERNAL SERVER–WAE acting as data center device for the
connection.
Peer_ID Device ID of the peer WAE.
App_map_name Map name.
App_classifier_name Classifier name.
App_name Application name.
Flag_directed_mode T (true) indicates a directed mode connection, F (false) otherwise.
TFO_cfgd_policy The TFO configured policy on the local device.
TFO_drvd_policy The TFO derived policy on the local device based on the configured and
dynamic conditions. This policy is used to negotiate with the peer WAE.
TFO_peer_policy The TFO derived policy on the peer that is sent to the local device.
TFO_neg_policy The TFO negotiated policy, which is the lowest common policy between the
derived and peer policies.
TFO_applied_policy The final policy applied to the connection. After the connection has been
established, policy changes may be made to the connection based on the
data on the connection, thus the applied policy can differ from the
negotiated policy.
TFO_reject_reason Indicates the reason for a rejected connection. “None” indicates the reject
reason is not set.
AO_cfgd_policy The application accelerator configured on the local device. This is derived
from the accelerator configured in the corresponding policy.
AO_drvd_policy The application accelerator derived policy on the local device.
AO_neg_policy The application accelerator negotiated policy, which is the lowest common
policy between the derived and peer policies.
AO_reject_reason Indicates the reason an application accelerator rejected the connection.
“None” indicates the reject reason is not set.
SSL_reject_reason Indicates the reason the SSL accelerator rejected the connection. “None”
indicates the reject reason is not set.
DSCP Differentiated Services Code Point value set on the outgoing connection.
Link_rtt Link round trip time in milliseconds.
Original_bytes_read Bytes read on the original side of the connection.
Table 1-1 Transaction Log Field Descriptions (continued)
Field Description