Troubleshooting guide

1-14
Cisco Wide Area Application Services Configuration Guide
OL-26579-01
Chapter 1 Configuring SNMP Monitoring
Enabling SNMP Traps
Figure 1-2 SNMP General Settings Window
Table 1-3 SNMP General Settings
GUI Parameter Function
Traps
Enable Snmp Settings Enables SNMP traps.
WAE Enables SNMP WAE traps:
• Disk Read—Enables disk read error trap.
• Disk Write—Enables disk write error trap.
• Disk Fail—Enables disk failure error trap.
• Overload Bypass—Enables WCCP overload bypass error trap.
• Transaction Logging—Enables transaction log write error trap.
SNMP Enables SNMP-specific traps:
• Authentication—Enables authentication trap.
• Cold Start—Enables cold start trap.
• LinkUp—Link up trap.
• LinkDown—Link down trap.