Troubleshooting guide

1-54
Cisco Wide Area Application Services Configuration Guide
OL-26579-01
Chapter 1 Monitoring and Troubleshooting Your WAAS Network
Configuring and Viewing Logs
Figure 1-11 Transaction Log Settings Window
Step 3
Under the General Settings heading, check the TFO Transaction Log Enable check box to enable
transaction logging. This check box does not appear for video transaction logging.
The fields on the window become active.
Step 4 In the Access Control List Name field, optionally enter the name of an access control list that you want
to use to limit transaction logging. If you specify an access control list, only transactions from hosts that
are defined in the access list are logged. This field does not appear for video transaction logging.
Use the ip access-list global configuration command to define an access list.
Step 5 Under the Archive Settings heading, specify values for the following fields:
• Max Size of Archive File—Maximum size (in kilobytes) of the archive file to be maintained on the
local disk. This value is the maximum size of the archived file to be maintained on the local disk.
The range is 1000 to 2000000. The default is 2000000.
• Archive Occurs Every (interval)—Interval at which the working log data is cleared and moved into
the archive log.
Step 6 Configure the fields in the Export Settings section to export the transaction log file to an FTP server.
Table 1-17 describes the fields in the Export Settings section.