Troubleshooting guide

1-42
Cisco Wide Area Application Services Configuration Guide
OL-26579-01
Chapter 1 Monitoring and Troubleshooting Your WAAS Network
Using Predefined Reports to Monitor WAAS
• CIFS: Cache Utilization—Displays the utilization percentage of the CIFS cache.
• CIFS: Cached Objects—Displays the number of objects in the CIFS cache.
• CIFS: Client Average Throughput—Displays the average throughput (in KB/second) between the
WAAS device and its clients.
Note When you use the Print icon in the taskbar to print the CIFS Acceleration report to a file, all the CIFS
charts will display the time in WAE local time (the CE Local Time setting), regardless of the chart time
zone settings that you have configured.
CIFS Acceleration Report for WAAS Express
The CIFS Acceleration report for WAAS Express displays the CIFS acceleration statistics for a WAAS
Express device. The following charts and tables are included:
• CIFS: Client Average Throughput, page 1-25
• CIFS: Connection Details, page 1-25
• CIFS: Effective WAN Capacity, page 1-25
• CIFS: Request Optimization, page 1-25
• CIFS Acceleration Statistics Table for WAAS Express, page 1-34
Resource Utilization Report
The Resource Utilization report displays the following charts:
• CPU Utilization
• Disk Utilization
Disks Report
The Disks Report displays physical and logical disk information.
The report window displays the following information about each disk:
• Physical disk information, including the disk name, serial number, and disk size.
• Present status. The Present field will show either Yes if the disk is present or Not Applicable if the
disk is administratively shut down.
• Operational status (NORMAL, REBUILD, BAD, UNKNOWN, or Online).
• Administrative status (ENABLED or DISABLED). When the Administrative Status field shows
DISABLED, the Present field will show Not Applicable.
• Current and future disk encryption status.
• Current and future extended object cache status.
• RAID level. For RAID-5 devices, the Disk Information window includes the RAID device name,
RAID status, and RAID device size.
• Error information, if any errors are detected.