Troubleshooting guide

1-13
Cisco Wide Area Application Services Configuration Guide
OL-26579-01
Chapter 1 Configuring the Network Analysis Module
Configuring the NAM
• Server WAN—Configures the WAE device to export the optimized (WAN side) TCP flows from its
servers to the NAM for monitoring.
• Server—Configures the WAE device to export the original (LAN side) TCP flows from its servers
to the NAM for monitoring.
• Passthrough—This setting configures the WAE device to export the TCP flows that are passed
through unoptimized.
Step 6 Click the Submit button to add the new WAAS custom data source.
Auto Creating a New WAAS Device
If you have numerous WAE devices, you can set up the NAM to configure newly discovered WAE
devices using a predefined configuration template using the NAM Auto Config option.
Note If most of your WAE devices are edge WAE devices, you might want to set the auto config option as an
edge device, and manually configure the data center WAE. For example, choose the Client segment for
monitoring.
Step 1 Choose Configure > Network Analysis Module > Advanced > Data Sources. The data sources appear.
Step 2 Click the Auto Create button.
The NAM Data Source Configuration dialog box appears.
Step 3 Check the WAA S check box.
Step 4 Check the check boxes for the required segments. See Adding a Data Source for a New WAAS Device,
page 1-12, for more information.
Step 5 Click the Submit button to add the new WAAS custom data source.
Editing a WAAS Data Source
You can edit a WAAS device’s custom data source.
Step 1 Choose Configure > Network Analysis Module > Advanced > Data Sources. The data sources appear.
Step 2 Click the WAAS device that you want to modify, and click the Edit button. The NAM Data Source
Configuration dialog box appears.
Step 3 Modify the segments as required.
Step 4 Click the Edit button to edit the WAAS custom data source.
Deleting a WAAS Data Source
You delete a WAAS custom data source.