Troubleshooting guide

1-41
Cisco Wide Area Application Services Configuration Guide
OL-26579-01
Chapter 1 Configuring Application Acceleration
Enabling and Disabling the Global Optimization Features
Note CA, CA URL, and challenge password settings are mandatory for enabling SSL auto enrollment.
Step 4 Configure the following Certificate Signing Request settings:
• Common Name
• Organization and Organization Unit
• Location, State, and Country
• Email-Id
Step 5 Configure the key size: 512, 768, 1024, 1536, or 2048
Step 6 Check the Enable Enroll box.
Step 7 Click Submit.
You can then check the enrollment status in the Machine Certificate section on the SSL Global Settings
page and on the Alerts page.
Configuring SSL Management Services
SSL management services are the SSL configuration parameters that affect secure communications
between the Central Manager and the WAE devices (see Figure 1-14 on page 1-30). The certificate/key
pairs used are unique for each WAAS device, and so SSL management services can only be configured
for individual devices, not device groups.
To configure SSL management services, follow these steps:
Step 1 From the WAAS Central Manager menu, choose Devices > device-name.
Step 2 Choose Configure > Security > Management Service.
The Management Services window appears (see Figure 1-26).