Troubleshooting guide

1-31
Cisco Wide Area Application Services Configuration Guide
OL-26579-01
Chapter 1 Configuring Application Acceleration
Enabling and Disabling the Global Optimization Features
Note If the SSL accelerator is already running, you must wait 2 datafeed poll cycles when registering a new
WAE with a Central Manager before making any configuration changes, otherwise the changes may not
take effect.
Configuring SSL Global Settings
To configure the basic SSL acceleration settings, follow these steps:
Step 1 From the WAAS Central Manager menu, choose Devices > device-name (or Device Groups >
device-group-name).
Step 2 Choose Configure > Security > SSL > Global Settings.
The SSL Global Settings window appears (see Figure 1-15).
Figure 1-15 SSL Global Settings Window
Step 3
To configure a device to use the SSL settings from a particular device group, choose the device group
from Select a Device Group drop-down list located in SSL global settings toolbar. A device can either
use its own SSL settings, or SSL settings from a device group. However, it is not possible to configure
a device to use SSL settings from multiple device groups.