Troubleshooting guide

1-13
Cisco Wide Area Application Services Configuration Guide
OL-26579-01
Chapter 1 Configuring Application Acceleration
Enabling and Disabling the Global Optimization Features
Task Flow for Configuring Encrypted MAPI
To configure Encrypted MAPI traffic acceleration, complete the tasks listed in Table 1-1. These tasks
must be performed on both data center and branch WAEs unless specifically noted as not required (or
optional).
Configuring Encrypted MAPI Settings
To configure Encrypted MAPI acceleration, follow these steps:
Step 1 Configure DNS Settings.
Table 1-1 Tasks for Configuring Encrypted MAPI
Task Additional Information and Instructions
1. Configure DNS Settings. To configure DNS settings, see the “Configuring the
DNS Server” section on page 1-26.
2. Configure NTP Settings. To synchronize the time with Active Directory, see the
“Configuring NTP Settings” section on page 1-5.
3. Verify WAE devices are registered and
online with the WAAS Central Manager.
To verify WAE devices are registered and online with
the WAAS Central Manager, see the “Devices
Window” section on page 1-6.
4. Configure SSL Peering Service. To configure SSL Peering Service, see the
“Configuring SSL Peering Service” section on
page 1-43.
5. Verify WAN Secure mode is enabled. To verify WAN Secure mode is enabled, use the
show accelerator wansecure EXEC command.
6. Configure windows domain settings and
perform domain join.
(The domain join function automatically
creates the machine account in Active
Directory.)
To configure Windows Domain Server Authentication
settings, see the “Configuring Windows Domain
Server Authentication Settings” section on page 1-17
section.
Note that performing a domain join of the WAE is not
required on branch WAE devices.
7. Configure domain identities (for machine
account and optional user accounts).
To configure a machine account identity, see the
“Configuring a Machine Account Identity” section on
page 1-15.
(Optional) To create a user account and configure a
user account identity, see the “Creating and
Configuring a User Account” section on page 1-17.
Note that configuring domain identities is not required
on branch WAE devices.
8. Enable Windows Domain Encrypted
Service.
To enable the Windows Domain Encrypted Service,
navigate to the Configure > Security > Windows
Domain > Encrypted Services page and check the
Enable Encrypted Service check box.
9. Enable Encrypted MAPI Traffic
Optimization.
To enable Encrypted MAPI Traffic, see the “Enabling
and Disabling the Global Optimization Features”
section on page 1-3.