Troubleshooting guide

1-16
Cisco Wide Area Application Services Configuration Guide
OL-26579-01
Chapter 1 Using the WAE Device Manager GUI
Managing a Cisco WAE
To define notification settings, follow these steps:
Step 1 In the Configuration window, click the Notifier tab. (See Figure 1-10.)
Figure 1-10 Notifier Tab
Step 2 In the Email address field, enter the address to which notifications about this WAE are sent.
Step 3 In the Mail server host name field, enter the name of the mail server host.
Step 4 In the Time period field, enter the time interval for notifications to accumulate until they are sent through
e-mail and choose the relevant time unit from the drop-down list (min or sec).
Step 5 From the Notify Level drop-down list, choose the minimum event severity level for generating
notifications.
Step 6 In the Mail server port field, enter the port number for connecting with the mail server.
Step 7 Check the Login to server check box if the WAE must log in to the mail server to send notifications. If
this option is selected, additional fields are enabled.
Step 8 In the Server username field, enter the username for accessing the mail server.
Step 9 In the Server password field, enter the password for accessing the mail server.
Step 10 In the From field, enter the text that should appear in the From field of each e-mail notification.
Step 11 In the Subject field, enter the text that should appear as the subject of each notification.
Step 12 From the SNMP Notify Level drop-down list, choose the minimum event severity level for generating
SNMP notifications.
Step 13 Click Save.