Troubleshooting guide

1-15
Cisco Wide Area Application Services Configuration Guide
OL-26579-01
Chapter 1 Using the WAE Device Manager GUI
Managing a Cisco WAE
Step 5 Click Refresh to ensure that all the tests complete successfully.
Defining Notification Settings
The Notifier tab allows you to define the e-mail address to which notifications are sent when alerts are
generated by the WAE.
Table 1-1 Authentication Test Descriptions
Test Description
wbinfo -t Verifies that the workstation trust account created when the Samba server is
added to the Windows domain is working.
wbinfo -a Tests the domain credentials based on the specified username and password. To
run this test, enter the appropriate username and password, and then click
Refresh. Wait for the test results to be displayed.
wbinfo -D Shows information from Samba about the domain.
wbinfo --sequence Shows the sequence numbers of all known domains.
Time skew Shows the time offset between the WAE and the KDC server. The time offset
must be within 5 minutes; otherwise, the Windows KDC server refuses to use
Kerberos for authentication. You can use the WAAS CLI to configure the time on
the WAE.
This test is performed only when Kerberos authentication is enabled.