Troubleshooting guide

1-28
Cisco Wide Area Application Services Configuration Guide
OL-26579-01
Chapter 1 Configuring Other System Settings
Managing WAAS Express Devices
Registering a WAAS Express Device Using the GUI
To register a WAAS Express device, follow these steps:
Step 1 From the WAAS Central Manager menu, choose Admin > Security > WAAS Express > Registration.
The WAAS Express Registration window appears. (See Figure 1-1.)
Note To register a WAAS Express device using the Central Manager GUI, SSH must be enabled on
the WAAS Express device.
Figure 1-1 WAAS Express Registration
Step 2
Configure the login credentials by entering the username, password, and enable password.
Step 3 Enter the HTTP Authentication, local or AAA.
Step 4 Enter the WAAS Express IP addresses to register. The IP address, hostname, and status are displayed in
the Registration Status table.
You may also upload a CSV file that contains a list of IP addresses to register. To upload a list, check
the Upload file check box and either browse to the file or enter the filename. Each IP address must be on
a separate line.
Step 5 Select the Central Manager IP address option, either default or NAT.
Step 6 Click the Register button and verify that the registration status was successful.
You may view the results in the log file: /local/local1/errlog/waasx-audit.log