Troubleshooting guide

1-11
Cisco Wide Area Application Services Configuration Guide
OL-26579-01
Chapter 1 Creating and Managing IP Access Control Lists for WAAS Devices
List of Extended IP ACL Conditions
ICMP Param Type
1
None Choices are None, Type/Code, or Msg.
None—Disables the ICMP Type, Code, and Message
fields.
Type/Code—Allows ICMP messages to be filtered by
ICMP message type and code. Also enables the ability to
set an ICMP message code number.
Msg—Allows a combination of type and code to be
specified using a keyword. Activates the ICMP message
drop-down list. Disables the ICMP Type field.
ICMP Message
1
administratively-
prohibited
Allows a combination of ICMP type and code to be
specified using a keyword chosen from the drop-down
list.
ICMP Type
1
0 Number from 0 to 255. This field is enabled when you
choose Type/Code.
Use ICMP Code
1
Unchecked When checked, enables the ICMP Code field.
ICMP Code
1
0 Number from 0 to 255. Message code option that allows
ICMP messages of a particular type to be further filtered
by an ICMP message code.
1. Required field.
Table 1-7 Extended IP ACL ICMP Condition (continued)
Field Default Value Description