Troubleshooting guide

1-9
Cisco Wide Area Application Services Configuration Guide
OL-26579-01
Chapter 1 Creating and Managing IP Access Control Lists for WAAS Devices
List of Extended IP ACL Conditions
Source Operator range Specifies how to compare the source ports against
incoming packets. Choices are <, >, ==, !=, or range.
Source Port 2 65535 Decimal number or name of a TCP port. See Source
Port 1.
Destination IP 0.0.0.0 Number of the network or host to which the packet is
being sent, specified as a 32-bit quantity in 4-part dotted
decimal format.
Destination IP
Wildcard
255.255.255.255 Wildcard bits to be applied to the source, specified as a
32-bit quantity in 4-part dotted decimal format. Place a 1
in the bit positions that you want to ignore and identify
bits of interest with a 0.
Destination Port 1 0 Decimal number or name of a TCP port. Valid port
numbers are 0 to 65535. Valid TCP port names are as
follows: ftp, ftp-data, https, mms, netbios-dgm,
netbios-ns, netbios-ss, nfs, rtsp, ssh, telnet, and www.
Destination Operator range Specifies how to compare the destination ports against
incoming packets. Choices are <, >, ==, !=, or range.
Destination Port 2 65535 Decimal number or name of a TCP port. See Destination
Port 1.
1. Required field.
Table 1-6 Extended IP ACL UDP Condition
Field Default Value Description
Purpose
1
Permit Specifies whether a packet is to be passed (Permit) or
dropped (Deny).
Extended Type
1
UDP Matches the UDP Internet protocol.
Established — Not available for UDP.
Source IP
1
0.0.0.0 Number of the network or host from which the packet is
being sent, specified as a 32-bit quantity in 4-part dotted
decimal format.
Source IP Wildcard
1
255.255.255.255 Wildcard bits to be applied to the source, specified as a
32-bit quantity in 4-part dotted decimal format. Place a 1
in the bit positions that you want to ignore and identify
bits of interest with a 0.
Source Port 1 0 Decimal number or name of a UDP port. Valid port
numbers are 0 to 65535. Valid UDP port names are as
follows: bootpc, bootps, domain, mms, netbios-dgm,
netbios-ns, netbios-ss, nfs, ntp, snmp, snmptrap, tacacs,
tftp, and wccp.
Source Operator range Specifies how to compare the source ports against
incoming packets. Choices are <, >, ==, !=, or range.
Table 1-5 Extended IP ACL TCP Condition (continued)
Field Default Value Description