Troubleshooting guide

1-6
Cisco Wide Area Application Services Configuration Guide
OL-26579-01
Chapter 1 Creating and Managing IP Access Control Lists for WAAS Devices
Creating and Managing IP ACLs for WAAS Devices
A green “Change submitted” indicator appears in the lower right corner of the Modifying IP ACL
window to indicate that the IP ACL is being submitted to the device database.
Step 8 Modify or delete an individual condition from an IP ACL:
a. Click the Edit icon next to the name of the IP ACL that you want to modify. The Modifying IP ACL
window appears, listing all the conditions that are currently applied to the IP ACL.
b. Click the Edit Condition icon next to the condition that you want to modify or delete. The
Modifying Condition window appears.
c. To modify the condition, change any allowable field as necessary.
d. To delete the condition, click the Trash (Delete IP ACL Condition) icon in the taskbar.
e. To reorder your list of conditions, use the Up or Down arrows in the Move column, and click
Submit.
Step 9 Associate a standard IP ACL with SNMP or WCCP:
a. Click the Edit icon next to the name of the device for which you want to associate a standard IP
ACL with SNMP or WCCP.
b. Choose Configure > Network > TCP/IP Settings > IP ACL Feature Usage. The IP ACL Feature
Settings window appears.
c. From the drop-down lists, choose the name of an IP ACL for SNMP or WCCP. (For more details,
see Table 1-3.) If you do not want to associate an IP ACL with one of the applications, choose Do
Not Set.
d. Click Submit to save the settings.
Step 10 Apply an IP ACL to an interface:
a. Click the Edit icon next to the name of the device for which you want to apply an IP ACL to an
interface on the WAE.
b. Choose Configure > Network > Network Interfaces.
The Network Interfaces window for the device appears. This window displays all the interfaces
available on that device.
c. Click the Edit icon next to the name of the interface to which you want to apply an IP ACL. The
Network Interface settings window appears.
d. From the Inbound ACL drop-down list at the bottom of the window, choose the name of an IP ACL.
e. From the Outbound ACL drop-down list, choose the name of an ACL.
Table 1-3 IP ACL Feature Settings
WAAS Central
Manager GUI
Parameter Function
SNMP Associates a standard IP ACL with SNMP. This option is supported for WAAS
devices that are operating as a WAE or a WAAS Central Manager device.
WCCP Associates any IP ACL with WCCP Version 2. This option is only supported for
WAAS devices that are operating as a WAE and not as a WAAS Central Manager
device. WCCP is only supported on WAEs; it is not supported on a WAAS
Central Manager device.