Troubleshooting guide

1-33
Cisco Wide Area Application Services Configuration Guide
OL-26579-01
Chapter 1 Configuring Administrative Login Authentication, Authorization, and Accounting
Viewing Audit Trail Logs
Step 7 Check the Enable CMS CLI Accounting check box to enable AAA accounting to TACACS+ server.
Step 8 Click Submit to save the settings.
To configure AAA accounting settings from the CLI, you can use the aaa accounting global
configuration command.
Viewing Audit Trail Logs
The WAAS Central Manager device logs user activity in the system. The only activities that are logged
are those activities that change the WAAS network. For more information on viewing a record of user
activity on your WAAS system, see the “Viewing the Audit Trail Log” section on page 1-57.
wait-start The WAAS device sends both a start and a stop accounting record to the
TACACS+ accounting server. However, the requested user service does
not begin until the start accounting record is acknowledged. A stop
accounting record is also sent.
Do Not Set Accounting is disabled for the specified event.
Table 1-2 Event Types for AAA Accounting (continued)
GUI Parameter Function