Datasheet

© 2005 Cisco Systems, Inc. All rights reserved.
Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com.
Page 7 of 10
SOFTWARE REQUIREMENTS
Table 7 gives software requirements, Table 8 gives ordering information, and Table 9 gives hardware specifications for the new interface cards.
Table 7. Minimum Cisco IOS Software Release Required for New WICs
Platform Minimum Cisco IOS
Software Release for
WIC-1SHDSL-V3
Support
Minimum Cisco IOS
Software 'T' train
support
Recommended Cisco
IOS Software Release
Cisco IOS Feature Set
Cisco 1841 and 2801
12.4(2)XA 12.4(3rd)T or 12.4(6)T 12.4(5)M IP Base and up
Cisco 2811 through
Cisco 2851
12.4(2)XA 12.4(3rd)T or 12.4(6)T 12.4(5)M IP Base and up
Cisco 3825 and 3845
12.4(2)XA 12.4(3rd)T or 12.4(6)T 12.4(5)M IP Base and up
Cisco 1721, 1751, and 1760
12.4(2)XA 12.4(3rd)T or 12.4(6)T 12.4(5)M IP/ADSL, IP Base, and up
Cisco 2610XM through
Cisco 2651XM and Cisco
2691
12.4(2)XA 12.4(3rd)T or 12.4(6)T 12.4(5)M IP Base and up
Cisco 3700 Series
12.4(2)XA 12.4(3rd)T or 12.4(6)T 12.4(5)M IP Base and up
Table 8. Product Number and Ordering Information
Product Number Description
WIC-1SHDSL-V3
1-port G.shdsl WIC with Four Wire Support (system)
WIC-1SHDSL-V3=
1-port G.shdsl WIC with Four Wire Support (spare)
CISCO1841-SHDSL-V3
1841 DSL bundle, WIC-1SHDSL-V3 (4-wire), IP Broadband, 32F/128D
C2801-SHDSL-V3/K9
2801 DSL bundle, WIC-1SHDSL-V3 (4-wire), SP Svcs, 64F/192D
C2811-SHDSL-V3/K9
2811 DSL bundle, WIC-1SHDSL-V3 (4-wire), SP Svcs, 64F/256D
Table 9. Hardware Specifications
G.SHDSL Chipset Conexant Chipset
Dimensions (H x W x D)
0.75 x 3.08 x 4.38 in. ( (1.91 x 6.93 x 9.86 cm)
Weight
2.4 oz (68g)
LEDs
CD (carrier detect)
LP (loopback)
OK (DSLSAR download complete)
Ports
Single RJ-11/RJ-14C connector
Cabling
RJ-11 line cord
Network Equipment
Building Standards
(NEBS) Compliance
Level 3 compliant (Type 2/4)