User guide

Wireless-G Ethernet Bridge

Instant Wireless

Series

Chapter 7: Using the Wireless-G

Ethernet Bridge Web-based Utility

The Bridge is designed to function properly after configuration using the Setup

Wizard. However, if you would like to change these settings or make more

advanced configuration changes, use your web browser and the Wireless-G

Ethernet Bridge Web-based Utility. This chapter explains how to use the Utility.

1. Open your web browser, and enter the IP address of the Wireless-G

Ethernet Bridge (the default is 192.168.1.226). Press the Enter key, and the

screen shown in Figure 7-1 will appear. In lowercase letters, enter the

default password, admin, in the Password field. Click the OK button. You

can set a new password on the Password screen later.

2. The Setup screen of the Bridge’s Utility will appear.

The Utility provides a convenient, web-browser-based way to alter the

Bridge’s settings. It offers five main tabs:

• Setup - Enables you to configure the IP address and wireless settings.

• Password - Allows you to change the password or reset all settings to fac-

tory defaults.

• Advanced - Lets you change the advanced wireless settings and clone a

MAC address onto the Bridge.

• Status - Displays the Bridge’s current settings.

• Help - Provides explanations of various configuration settings and links to

online technical support resources.

Figure 7-2

Starting the Web-based Utility

Overview

Figure 7-1