User guide

Chapter 2: Getting to Know the

Wireless Ethernet Bridge

Reset The Reset button resets the Bridge to its factory default set-

tings.

X-II The X-II selection switch offers a choice between two set-

tings. Use the X setting if you are connecting the Bridge to a

network card or other Ethernet device. Use the II setting if

you are connecting the Bridge to a hub or switch.

LAN The LAN port is where you will connect your Ethernet net-

work cable.

Power The Power port is where you will connect your power.

• One Wireless Ethernet Bridge

• One External Antenna

• One Power Adapter

• One Category 5 Ethernet Network Cable

• One Setup CD-ROM with User Guide

• One Quick Installation

• One Registration Card

Package Contents

The Wireless Ethernet Bridge’s Back Panel

Instant Wireless

Series

Wireless Ethernet Bridge

2 3

Figure 1-1

Figure 2-1