Specifications

Configuring the WAP200 Access Point
Configuring Administration Settings
Cisco WAP200 Wireless-G Access Point with Power Over Ethernet and Rangebooster 66
6
Upgrading the Firmware
The Administration > Firmware Upgrade window allows you to upgrade the
access point’s firmware.
!
CAUTION Do not upgrade the firmware unless you are experiencing problems with the
access point or the new firmware has a feature you want to use. Upgrading the
firmware deletes all custom settings. To preserve your custom settings, save them
to disk before upgrading the firmware, as described in “Managing the Access
Point’s Configuration,” on page 68.
To upgrade the firmware of the access point, follow these steps:
STEP 1 Upgrade the firmware of the access point.
a. Download the firmware upgrade file from www.cisco.com/en/US/products/
ps10048/index.html.
b. Extract the firmware upgrade file and save it on your computer.
c. Click Administration > Firmware Upgrade.