Specifications

Configuring the WAP200 Access Point
Configuring Wireless Settings
Cisco WAP200 Wireless-G Access Point with Power Over Ethernet and Rangebooster 40
6
STEP 4 To enable wireless isolation within SSID, select Enabled from the drop-down
menu. Otherwise, select Disabled.
STEP 5 Provide the following information:
• RADIUS Server IP Address—Enter the RADIUS server’s IP address.
• RADIUS Server Port—Enter the port number used by the RADIUS server.
The default is 1812.
• Shared Secret—Enter the shared secret key used by the access point and
RADIUS server.
STEP 6 Click Save.