Specifications

Configuring the WAP200 Access Point
Configuring Wireless Settings
Cisco WAP200 Wireless-G Access Point with Power Over Ethernet and Rangebooster 36
6
STEP 5 Provide the following information:
RADIUS Server IP Address—Enter the RADIUS servers IP address.
RADIUS Server Port—Enter the port number used by the RADIUS server.
The default is 1812.
Encryption—WPA2 always uses AES for data encryption.
Shared Secret—Enter the shared secret key used by the access point and
RADIUS server.
Key Renewal Timeout—Enter a key renewal timeout period, which instructs
the access point how often it should change the encryption keys. The default
is 3600 seconds.
STEP 6 Click Save.