Specifications

Configuring the WAP200 Access Point
Configuring Wireless Settings
Cisco WAP200 Wireless-G Access Point with Power Over Ethernet and Rangebooster 34
6
STEP 5 Provide the following information:
• RADIUS Server IP Address—Enter the RADIUS server’s IP address.
• RADIUS Server Port—Enter the port number used by the RADIUS server.
The default is 1812.
• Encryption—WPA offers you two encryption methods, TKIP and AES for
data encryption. Select the type of algorithm you want to use, TKIP or AES.
The default is TKIP.
• Shared Secret—Enter the shared secret key used by the access point and
RADIUS server.
• Key Renewal Timeout—Enter a key renewal timeout period, which instructs
the access point how often it should change the encryption keys. The default
is 3600 seconds.
STEP 6 Click Save.