Specifications

Getting Started

Navigating the Web-Based Utility

Cisco WAP200 Wireless-G Access Point with Power Over Ethernet and Rangebooster 16

Navigating the Web-Based Utility

The web-based utility consists of the following five main windows:

• Setup

• Wireless

• AP Mode

• Administration

• Status

Additional windows branch out from these main windows.

For a basic network setup, you may only need to use the following windows of the

web-based configuration utility:

• Setup—Enter your basic network settings.

• Management—Click Administration > Management and create a new

password to replace the default password (admin).

• Wireless—To change the default SSID, click Wireless > Basic Settings

and make the necessary changes. To change the level of security, click

Wireless > Security and make the necessary changes.

Setup

This window allows you to configure the host name and IP address settings and to

set the time through the following windows:

• Basic Setup—Configures the Host Name and IP Address settings for this

access point.

• Time—Sets the time either manually, or automatically from a time server if

the access point can access the public internet.