User guide

Chapter 5 Voice
78 3425-00669 Rev E
1 From the CW Setting drop-down menu, select yes or no to indicate if you want
to use the Call Waiting feature for all calls. The default is yes.
2 From the Block CID Setting drop-down menu, select yes or no to indicate if you
want to block Caller ID for all calls. The default is no.
3 From the Block ANC Setting drop-down menu, select yes or no to indicate if
you want to block anonymous calls. The default is no.
4 From the DND Setting drop-down menu, select yes or no to indicate if you want
to use the Do Not Disturb (DND) feature. The default is no.
5 From the CID Setting drop-down menu, select yes or no to indicate if you want
to enable Caller ID generation. The default is yes.
6 From the CWCID Setting drop-down menu, select yes or no to indicate if you
want to enable Caller ID for Call Waiting. The default is yes.
7 From the Dist Ring Setting drop-down menu, select yes or no to indicate if you
want to use the Distinctive Ring feature. The default is yes.
8 From the Message Waiting drop-down menu, select yes or no to indicate if you
want to use the Message Waiting feature. The default is no.
9 Click the Save Settings button to apply your changes or Cancel Changes button
to cancel.
Distinctive Ring Settings
Path: Voice > User1 or User2
Complete the following steps to configure your Distinctive Ring Settings.
1 Enter the caller number pattern for each Dial setting in the field (Ring1-8 Caller)
to play Distinctive Ring/Call Waiting Tone.
2 Click the Save Settings button to apply your changes or Cancel Changes button
to cancel.