User guide

Chapter 5 Voice
70 3425-00669 Rev E
Next Registration—In The number of seconds until the next registration is
displayed.
Diff Resistive Fault—The amount of differential resistive fault is displayed.
Message Waiting— his indicates whether you have new voicemail waiting.
Long Resistive Fault—The amount of long resistive fault is displayed.
Call Back Active—This indicates whether a call back request is in progress.
REN—The Ringer Equivalence Number (REN) is displayed.
Last Called Number—The last number called is displayed.
Last Caller Number—The number of the last caller is displayed.
Mapped SIP Port—The port number of the NAT mapped SIP port is displayed.
Call 1/2 Status
Calls 1 and 2 have the same status information available.
Path: Voice > Info
Call 1/2 State—The status of the call is displayed.
Call 1/2 Tone—The type of tone used by the call is displayed.
Call 1/2 Encoder—The codec used for encoding is displayed.
Call 1/2 Decoder—The codec used for decoding is displayed.
Call 1/2 FAX—The status of the fax pass-through mode is displayed.
Call 1/2 Type—The direction of the call is displayed.
Call 1/2 Remote Hold—This indicates whether the far end has placed the call on
hold.
Call 1/2 Callback—This indicates whether the call was triggered by a call back
request.
Call 1/2 Peer Name—The name of the internal phone is displayed.
Call 1/2 Peer Phone—The phone number of the internal phone is displayed.
Call 1/2 Duration—The duration of the call is displayed.
Call 1/2 Packets Sent—The number of packets sent is displayed.
Call 1/2 Packets Recv—The number of packets received is displayed.
Call 1/2 Bytes Sent—The number of bytes sent is displayed.
Call 1/2 Bytes Recv—The number of bytes received is displayed.