User guide

Security
3425-00669 Rev E 55
WPA2-Personal
Mixed Mode—Select Enabled to support both WPA and WPA2 clients. Otherwise,
keep the default, Disabled.
Encryption—Select the appropriate method, AES or TKIP or both.
Passphrase—Enter a Passphrase (also called a WPA shared key) of 8-63 characters.
Key Renewal—Enter a Key Renewal period, which instructs the residential gateway
how often it should change the encryption keys. The default is 3600 seconds.
WPA-Personal
Encryption TKIP is automatically selected.
Passphrase—Enter a Passphrase (also called a WPA shared key) of 8-63 characters.
Key Renewal—Enter a Key Renewal period, which instructs the Gateway how often
it should change the encryption keys. The default is 3600 seconds.
WEP
Encryption—Select a level of WEP encryption, 40/64-bit (10 hex digits) or 104/128-
bit (26 hex digits).
Passphrase—Enter a Passphrase to automatically generate WEP keys. Then click
Generate.
Note: The WEP Passphrase is compatible with Cisco wireless products only. If you
are using non-Cisco products, manually enter the appropriate WEP key on those
devices.
Key 1-4—If you did not enter a Passphrase, enter the WEP key(s) manually.
TX Key—Select which TX (Transmit) Key to use. The default is 1.