User guide

Chapter 3 Setup
46 3425-00669 Rev E
PVC/VLAN Mapping
This advanced screen is used to map the PVCs to the Virtual Local Area Networks
(VLANs). When you create a mapping, a layer 2 bridge is formed between the
Gateway’s LAN port (including WLAN SSID) and WAN port (PVC or Ethernet
WAN).
Cisco recommends that you configure this screen according to your service
provider’s instructions. For example, when Ethernet port 1 is connected to a set-top
box, a PVC mapping is created for Ethernet port 1 and PVC 1 with VLAN 1002.
Traffic is marked with the configured VLAN ID when it travels to the service
provider’s network.
Path: Setup > PVC/VLAN Mapping
Select PVC Connection—Select the PVC you want to map.