User guide

Chapter 3 Setup
44 3425-00669 Rev E
Advanced Routing
This screen is used to set up the Gateway’s advanced routing functions. Static
Routing sets up a fixed route to another network destination.
Path: Setup > Advanced Routing
Routing Table
For each route, the Destination LAN IP address, Subnet Mask, Gateway, and Metric
are displayed. In the Action column, click Delete to delete a static route.
Default Interface—The default Layer 3 connection is displayed.
Default Gateway—The default next-hop gateway of the default interface is
displayed.
Default Connection—This advanced setting usually indicates the default connection
since the Gateway supports multiple WAN connections. If the Gateway has multiple
connections, specify which one is the default.