User guide

Setting System Date and Time
3425-00669 Rev E 41
Setting System Date and Time
Time Settings
Complete the following steps to set time and date.
1 In the the Time Zone field, select the time zone in which your network
functions.
2 If you want the Gateway to automatically adjust for daylight saving time, select
the Automatically adjust clock for daylight saving changes option.
3 In the NTP Server 1/2 field, enter the URL (web address) of the Network Time
Protocol (NTP) server you want to use.
Note: The default NTP servers are time.nist.gov and clock.isc.org.
4 Click Update Time to immediately synchronize the Gateway with the NTP
server.
5 Click Save Settings to apply your changes, or click Cancel Changes to cancel
your changes.