User guide

Ethernet
3425-00669 Rev E 33
Ethernet
Configure the residential gateway’s Ethernet settings on this screen.
Path: Setup > Ethernet
Note: There are two views available, Basic and Advanced. The default view is Basic.
To display the Advanced View, click Advanced View. To return to the Basic View,
click Basic View.
5th Ethernet Port
Complete the following steps to configure the fifth Ethernet port on your residential
gateway.
Note: If you use the fifth Ethernet port as a WAN port, then the ADSL port is
automatically disabled, and all routing goes to other Ethernet ports.
1 Select the desired Ethernet Connection setting as follows:
 To use the fifth Ethernet port as a WAN port, select Use as WAN Port.
Continue with step 2.
 To use the fifth Ethernet port as a Local Area Network (LAN) port, select Use
as LAN Port. Skip to step 3.
2 Configure the Ethernet WAN Setup settings that appear:
a Set Connection Shaping—To disable QoS Shaping, select No Shaping. To
shape according to link speed, select Auto (link speed). To manually enter
the shape rate, select Manual, and then enter the number of kbps in the field
provided.