User guide

Chapter 3 Setup
30 3425-00669 Rev E
2 Select for the desired Connection Type for the PVC setup for WAN. The screen
refreshes to display the applicable fields.
3 If your service provider says you are connecting through a dynamic IP address,
select the Obtain an IP Address Automatically option; then, continue with step
4. Otherwise, skip to step 6.
4 When you select the Obtain an IP Address Automatically option for an IPoE
WAN connection, you can configure the following additional parameters for
DHCP transactions:
 Sent DHCP Options button.
a Option Tag—Enter the DHCP Option Tag to be included in the DHCP Sent
request.
b Option Value—Enter the DHCP Option Value to be included in the DHCP
Sent request. The value must be a hexadecimal string to represent a binary
option value. (No check is performed on these values.)
c To add the entry, click Add Option. To cancel your changes and return to the
ADSL screen, click Back to ADSL Setup.
 Request DHCP Options button.
a Option Tag—Enter the DHCP Option Tag to be included in the DHCP
request.