User guide

Logging in to the Residential Gateway
3425-00669 Rev E 17
Logging in to the Residential Gateway
Complete the following steps to access the web-based utility.
Note: If the residential gateway was supplied by your service provider, then it may
restrict access to the web-based utility. Contact your service provider for the login
information.
1 Launch the web browser on your computer.
2 Type 192.168.1.1 in the URL Address field. This value is the residential gateway's
default IP address.
3 Press Enter. A login screen appears.
4 Is this the first time you have opened the web-based utility?
 If yes, type admin in the User name and Password fields. (You can change
the default values to a new user name and password from the
Administration tab’s Management screen.)
 If no, enter the user name and password you established previously.
5 Click OK to continue. The web-based utility opens. Upon logging into the web-
based utility, the Basic Setup screen appears. There are two views available, Basic
and Advanced. The default view is Basic. To display the Advanced View, click
Advanced View. To return to the Basic View, click Basic View.
6 To continue setup, go to the section applicable for your desired configuration:
 ADSL (on page 18)
 Ethernet (on page 33).