Specifications

3-759
Cisco Wide Area Application Services Command Reference
OL-21611-01
Chapter 3 CLI Commands
SSL Host Peering Service Configuration Mode
Commands
SSL peering service configuration parameters control secure communications established by the SSL
accelerator between WAE devices while optimizing SSL connections. To configure secure socket layer
(SSL) encryption peering services on a WAAS device, use the crypto ssl services host-service global
configuration command. To delete a parameter use the no form of the command.
crypto ssl services host-service peering
no crypto ssl services host-service peering
Syntax Description This command has no arguments or keywords.
Defaults No default behavior or values.
Command Modes global configuration
Device Modes application-accelerator
central-manager
Usage Guidelines Use the crypto ssl services host-service command to configure SSL peering service parameters. The
crypto ssl services host-service command initiates SSL host peering service configuration mode, as
indicated by the following prompt:
WAE(config-ssl-peering)#
Within SSL host peering service configuration mode, you can use SSL host peering service configuration
commands. To return to global configuration mode, enter exit at the SSL host peering service
configuration mode prompt.
Examples The following example shows how to enter SSL host peering service configuration mode:
WAE(config)# crypto ssl services host-service
WAE(config-ssl-peering)# exit
WAE(config)#
Related Commands (config-ssl-peering) cipher-list
(config-ssl-peering) peer-cert-verify