Specifications

3-745
Cisco Wide Area Application Services Command Reference
OL-21611-01
Chapter 3 CLI Commands
(config-ssl-accelerated) server-ip
(config-ssl-accelerated) server-ip
To configure the accelerated server IP address and TCP port, use the server-ip command.
server-ip ip-address {port port-no}
Syntax Description
Defaults No default behavior or values.
Command Modes SSL accelerated service configuration
Device Modes application-accelerator
central-manager
Examples The following example shows how to enter SSL accelerated service configuration mode, and then set the
accelerated server IP address and port:
WAE(config)# crypto ssl services accelerated-service myservice
WAE(config-ssl-accelerated)# server-ip 2.2.2.2 port 1
Related Commands (config) crypto ssl
server-ip ip-address Specifies the IP address of the accelerated server.
port port-no Specifies the port number of the accelerated server. Range is 1 to
65535.