Specifications

3-744

Cisco Wide Area Application Services Command Reference

OL-21611-01

Chapter 3 CLI Commands

(config-ssl-accelerated) server-domain

To configure the accelerated server domain and TCP port, use the server-domain command.

server-domain srv-domain {port port-no}

Syntax Description

Defaults No default behavior or values.

Command Modes SSL accelerated service configuration

Device Modes application-accelerator

central-manager

Examples The following example shows how to enter SSL accelerated service configuration mode, and then set the

accelerated server domain name and port:

WAE(config)# crypto ssl services accelerated-service myservice

WAE(config-ssl-accelerated)# server-domain 2.2.2.2 port 1

Related Commands (config) crypto ssl

server-domain srv-domain Specifies the domain name of the accelerated server starting with

the characters “*.”. 255 alphanumeric characters maximum, 63

characters per label/segment.

port port-no Specifies the port number of the accelerated server. Range is 1 to

65535.