Specifications

3-724

Cisco Wide Area Application Services Command Reference

OL-21611-01

Chapter 3 CLI Commands

(config-vb) vnc

To enable the VNC server for a virtual blade, use the vnc virtual blade configuration command. To

disable the VNC server for a virtual blade, use the no form of this command.

vnc

no vnc

Syntax Description This command has no arguments or keywords.

Defaults The VNC server is enabled by default.

Command Modes virtual blade configuration mode

Device Modes application-accelerator

Usage Guidelines The VNC server is enabled by default.

When you disable the VNC server, any active VNC connections are closed.

Examples The following example shows how to disable the VNC server for virtual blade 2:

WAE(config)# virtual-blade 2

WAE(config-vb)# no vnc

Related Commands (config-vb) autostart

(config-vb) boot

(config-vb) cpu-list

(config-vb) description

(config-vb) device

(config-vb) disk

(config-vb) interface