Specifications

3-695
Cisco Wide Area Application Services Command Reference
OL-21611-01
Chapter 3 CLI Commands
(config-preposition) duration
(config-preposition) duration
To set the maximum duration for a preposition task, use the duration preposition configuration
command. To remove a duration limit, use the no form of this command.
duration minutes
no duration minutes
Syntax Description
Defaults No default behavior or values.
Command Modes preposition configuration mode
Device Modes application-accelerator
Usage Guidelines This command specifies the maximum amount of time that the WAAS software should take to complete
the preposition task. If the software takes longer than this amount of time, the software stops the
prepositioning process before all files are copied to the Edge WAE cache. If the preposition task does
not start at the scheduled start time (for example, because the Edge and the Core have no connection),
the start retries are counted in the duration. If you do not specify a value for this command, WAAS takes
as much time as needed to export this file server.
Examples The following example shows how to set the maximum task duration to 60 minutes:
WAE(config)# accelerator cifs preposition 3
WAE(config-preposition)# duration 60
Related Commands (config-preposition) schedule
minutes Maximum number of minutes that the preposition task is allowed to run.