Specifications

3-659
Cisco Wide Area Application Services Command Reference
OL-21611-01
Chapter 3 CLI Commands
(config-if) shutdown
(config-if) shutdown
To shut down a specific hardware interface on a WAAS device, use the shutdown interface configuration
command. To restore an interface to operation, use the no form of this command.
shutdown
no shutdown
Syntax Description This command has no arguments or keywords.
Defaults No default behavior or values.
Command Modes interface configuration
Device Modes application-accelerator
central-manager
Usage Guidelines See the “(config) interface GigabitEthernet” command for alternative syntax.
Examples The following example shows how to shut down a Gigabit Ethernet interface on the WAAS device:
WAE# configure
WAE(config)# interface GigabitEthernet 2/0
WAE(config-if)# shutdown
Related Commands (config) interface GigabitEthernet
show interface
show running-config
show startup-config