Specifications

3-636

Cisco Wide Area Application Services Command Reference

OL-21611-01

Chapter 3 CLI Commands

(config) wccp version

To specify the version of WCCP that the WAE should use, enter the wccp version global configuration

command. To disable the currently running version, use the no form of this command.

wccp version 2

no wccp version 2

Syntax Description This command has no arguments or keywords.

Defaults No default behavior or values.

Command Modes global configuration

Device Modes application-accelerator

Usage Guidelines You must configure a WAE to use WCCP Version 2 instead of WCCP Version 1 because WCCP

Version 1 only supports web traffic (port 80).

The WAE performs a clean shutdown after a reload or no wccp version 2 command is entered. A clean

shutdown prevents broken TCP connections.

Note WCCP works only with IPv4 networks.

Examples The following example shows how to enable WCCP Version 2 on a WAE:

WAE(config)# wccp version 2

Related Commands (config) wccp tcp-promiscuous mask

(config) wccp router-list