Specifications

3-628

Cisco Wide Area Application Services Command Reference

OL-21611-01

Chapter 3 CLI Commands

(config) wccp flow-redirect

To enable WCCP flow redirection on a WAE, use the wccp flow-redirect global configuration

command. To disable flow redirection, use the no form of this command.

wccp flow-redirect enable

no wccp flow-redirect enable

Syntax Description

Defaults Enabled

Command Modes global configuration

Device Modes application-accelerator

Usage Guidelines Use the wccp flow-redirect global configuration command to implement WCCP flow protection. Flow

protection is designed to keep the TCP flow intact as well as to not overwhelm WAEs when they are first

started up or are reassigned new traffic. This feature also has a slow start mechanism where the WAEs

try to take a load appropriate for their capacity.

Note When you enable bypass, the client tries to reach the origin web server. You must disable all bypass

options to eliminate an unnecessary burden on the network.

WCCP works only with IPv4 networks.

Examples The following example shows how to enable WCCP flow protection on a WAE:

WAE(config)# wccp flow-redirect enable

Related Commands show wccp

enable Enables flow redirection.