Specifications

3-7
Cisco Wide Area Application Services Command Reference
OL-21611-01
Chapter 3 CLI Commands
clear arp-cache
clear arp-cache
To clear the ARP cache, use the clear arp-cache EXEC command.
clear arp-cache [ipaddress | interface {GigabitEthernet 1-2/port | PortChannel 1-2 | Standby 1}]
Syntax Description
Defaults No default behavior or values.
Command Modes EXEC
Device Modes application-accelerator
central-manager
Examples The following example shows how to clear the ARP cache on the WAAS device:
WAE# clear arp-cache
Related Commands license add
show interface
show license
show wccp
arp-cache Clears the ARP cache.
ipaddress (Optional) ARP entries for the IP address.
interface (Optional) Clears all ARP entries on the interface.
GigabitEthernet 1-2/port GigabitEthernet interface (slot/port).
PortChannel 1-2 PortChannel interface number. Values are 1 or 2
Standby 1 Standby interface number 1.