Specifications

3-604
Cisco Wide Area Application Services Command Reference
OL-21611-01
Chapter 3 CLI Commands
(config) tacacs
Server Status
---------------------------- ------
10.107.192.148 primary
10.107.192.168
10.77.140.77
You can configure the password type to be ASCII using the tacacs password ascii command. You can
then verify the changes using the show tacacs command.
WAE(config)# tacacs password ascii
WAE(config)# exit
WAE# show tacacs
Login Authentication for Console/Telnet Session: enabled (secondary)
Configuration Authentication for Console/Telnet Session: enabled (secondary)
TACACS+ Configuration:
---------------------
TACACS+ Authentication is off
Key = *****
Timeout = 5
Retransmit = 2
Password type: ascii
Server Status
---------------------------- ------
10.107.192.148 primary
10.107.192.168
10.77.140.77
Related Commands (config) authentication configuration
show authentication
show statistics authentication
show statistics tacacs
show tacacs